Haier HCR17W HCR17 Manual - Page 7
Electrical Requirement, Use of Extension Cords, Installation Limitations
View all Haier HCR17W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
English Electrical Requirement t. BLFTVSFUIFSFJTBTVJUBCMFQPXFSPVUMFU WPMUT BNQTPVUMFU XJUI proper grounding to power the refrigerator. t" WPJEUIFVTFPGUISFFQSPOHBEBQUFSTPSDVUUJOHPGGUIFUIJSEHSPVOEJOHQSPOH in order to accommodate a two prong outlet. This is a dangerous practice since it provides no effective grounding for the refrigerator and may result in shock hazard. Use of Extension Cords t" WPJEUIFVTFPGBOFYUFOTJPODPSECFDBVTFPGQPUFOUJBMTBGFUZIB[BSETVOEFS certain conditions. If it is necessary to use an extension cord, use only a 3-wire extension cord that has a 3-blade grounding plug and a 3-slot outlet that will accept the plug. The marked rating of the extension cord must be equal to or greater than the electrical rating of the appliance. Installation Limitations t% POPUJOTUBMMZPVSSFGSJHFSBUPSJOBOZMPDBUJPOOPUQSPQFSMZJOTVMBUFEPSIFBUFE e.g. garage, etc. Your refrigerator was not designed to operate in temperature settings below 55˚ Fahrenheit. t4 FMFDUBTVJUBCMFMPDBUJPOGPSUIFSFGSJHFSBUPSPOBIBSEFWFOTVSGBDFBXBZ from direct sunlight or heat source, e.g. radiators, baseboard heaters, cooking appliances, etc. Any floor unevenness should be corrected with the leveling legs located on the front bottom corners of the refrigerator. NOTE: As the door gets pressed in during shipping, after reversing the door, the gasket may have to be reset. This is done to prevent the cool refrigerated air from escaping. If there is a gap between the door gasket and the cabinet, set the gasket by gently pulling it out to seal the gap. 6