Haier HD90-A2979 UM - New version 1 - Page 25

EN 11-Installation 11.6 Reversing the door swing (Only for 8/9kg models) ▶ Before you start, unplug the dryer from its electrical outlet. ▶ Handle parts carefully to avoid scratching paint. ▶ Provide a non-scratching work surface for the doors. ▶ Tools you will need: Phillips-head screwdriver. ▶ Once you begin, do not move the cabinet until door-swing reversal is completed. ▶ These instructions are for changing the hinges from the right side to the left side. If you ever want to switch them back to the right side, follow these same instructions and reverse all references to the left and right. 1. Remove the door assembly Open the door. Remove the two screws holding thehinge/door assembly to the dryer. Carefully set the hinge/door assembly aside (Fig. 11-4). 11-4 Hinge and Door Assembly 2. Remove, rotate and replacethe inner door Remove the eight stickers and screws securing the inner door to the outer door. Remove the inner door, rotate it 180° and reinstall it into the outer door using the same eight screws and stickers (Fig. 11-5). 3. Remove, rotate and replace the door lock & strike plate Remove the two screws holding the strike plate, and then remove one screw of the door lock, push down and take out the lock rotated 180° and install it on the opposite side. the same eight screws and stickers (Fig. 11-6). screws and stickers. Hold the Door and Remove Hinge Screws from the Dryer 11-5 Remove eight stickers and screws side. Strike Plate and Screws 1.Push down 2.rotate an angle then can take out Remove the Inner door and rotated 180 o as shown Replace the inner door with eight screws and stickers Replace the Door lock and then Reinstall Strike Plate and Screws 11-6 4. Rotate and replace the hinge/door assembly Remove the two screws holding the strike plate, and then remove one screw of the door lock, push down and take out the lock rotated 180° and install it on the opposite side. the same eight screws and stickers (Fig. 11-7). Secure with same two screws 11-7 11.7 Wash-dryer stack The arrangement to a space saving wash-dryer stack is possible (Fig. 11-8). Not every washing machine is suitable for this purpose. Information, as well as the corresponding mounting kit are available via your local dealer. The mounting instructions supplied with the kit carefully inform about the installation steps. 11-8 25