Haier HDC1804TW Product Manual - Page 18

English 11. At the end of the cycle, the dishwasher will stop, the program light will stop flashing and the dishwasher will beep for several seconds. Then, the cycle light will go out. The power light will stay on until the power (ON/OFF) button is switched to the OFF position. NOTE: The dishwasher is designed to stop if the door is opened accidentally during washing. 12. If you need to disrupt operation, press the PAUSE button and the unit will stop operation at that point in the cycle. To resume operation, make sure the door is securely closed and the press the PAUSE button again. Pause is also used if the faucet water supply is needed for other purposes during the washing cycle. WARNING: To avoid leaks, DO NOT open the door when the dishwasher is running. Even after pushing the PAUSE button to interrupt operation, DO NOT open the door immediately because the moist hot area remaining in the tub may cause harm. Waiting a few seconds allows cold air to expand slowly inside the dishwasher's interior compartment. 13. After washing, dishes should be allowed to cool down and continue the drying process for about 10 minutes so that they are not to hot to handle. Dishes will cool quicker if the door is opened slightly. WARNING!: Do Not open the dishwasher door immediately because the moist hot air remaining inside the chamber may cause harm. Keep children away from the machine when the door is left open to dry the dishware. 17