Haier HDV70A1 user manual - Page 7
Stacking installation
View all Haier HDV70A1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
SAFETY AND WARNINGS Your dryer has been designed to be able to be stacked on the top of a Haier front load washing machine, ensure the washing machine is the same width as your dryer. Stacking installation Tools and parts required: ■ Drill and 2.9mm bit ■ Phillips head screwdriver Stacking bracket includes: ■ 2 x Stacking bracket 1 Remove 4 screws at two sides of bottom panel, then install the stacking bracket. 4 Screws Stacking bracket 2 Install your dryer with stacking bracket on the top of the front load washing machine. Drill two holes on both sides of top panel of washing machine with 2.9mm diameter drill. Detailed drill position as shown on the stacking bracket. Only use the screws supplied in the stacking bracket. Fix the stacking bracket on the top panel of washing machine. ■ The width of front load washing machine that can be stacked installation is 595mm at least. Screws can be installed on both sides of the top panel of the washing machine. ■ The depth of front load washing machine should be greater than the depth of dryer. Dryer Stacking bracket Front load washing machine 5