Haier HDW100SCT User Manual - Page 6

Loading the Dishwasher Before placing the dishes in the dishwasher, remove the larger food particles to prevent the filter from becoming clogged. If the pots and pans have baked-on food that is extremely hard to remove, we recommend they are soaked before washing. This will eliminate the need for extra wash cycles. Pull out the rack to load the dishwasher. Lower Rack The lower rack Place the most difficult to clean items on the bottom rack: pots, pans, lids, serving dishes and bowls. It is preferable to place serving dishes and lids on the sides of the racks in order to avoid blocking the rotation of the top spray arm. - Pots, serving bowls, etc. must always be placed face down. - Deep pots should be tilted to allow the water to flow out. Upper Rack The upper rack The upper rack is designed to hold more delicate and lighter dishes, such as glasses, cups and saucers, plates and small bowls. - Position the dishes so that they do not move by the spray of the water. To adjust the height of the upper rack, rotate the caps located on the end of the rack guide rails to the side, remove the rackcompletely and refit using the alternate set of wheels (see fig.B). Adjust the upper basket to the higher level to allow more height in the bottom basket for large items. Load for 12 Standard Settings Information on comparability tests implemented in compliance with AS/NZS 2007 Appliance loaded in accordance with standard specifications. Example of loaded dishwasher: See fig. A and B. Capacity: 12 place settings Comparability programme: NORMAL wash Rinse-aid setting: 5 Detergent: 25+5g Height-adjustable top-basket must be inserted in the uppermost position. If the comparability tests do not comply fully with AS/NZS 2007, e.g., degree of soiling, type of dishes and cutlery, etc., contact the appliance manufacturer before starting the 5 test. fig.A fig.B