Haier HDW201SS User Manual - Page 6
Turning, on the Appliance - dishwasher manual
View all Haier HDW201SS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
Turning on the Appliance Starting a wash cycle Setting the Wash Cycle with a Delayed Start Time After having completed all of the installation steps in the preceding paragraphs, turn on the water all the way and press the ON- Premise: After selecting the wash cycle as indicated in the paraOFF button (A) located on the control panel. The "B" indicator graph entitled, "Setting and Starting a Wash Cycle..." the delay light will come on. At this point, the appliance is on but you must time can be set. wait a few seconds before programming the setting for the cycle. By pressing the "E" button (see close-up view-'Control panel") Setting and Starting a wash Cycle Select the desired cycle by pressing the selector button (G). Each time the button is pressed, one of the "H" cycle indicator lights will come on in succession. Choose the wash cycle you feel is most appropriate for the type of dishes that need washing (consult the wash cycle table contained in this manual, especially when first using the appliance). the start of wash cycle can be delayed for between 1 to 9 hours. Each time the button is pressed, the display (F) will show the number of hours for the delay period. Choose the amount of time desired. When the appliance is started with "I" button, a short acoustic signal will sound and the delay time on the display will blink, indicating that the countdown has begun. After the time has lapsed, the cycle will start. Press the Start/Pause button (I), and after a few seconds a short acoustic sound will indicate that the wash cycle has begun and NOTE: can no longer be changed. If necessary, read the paragraph en- titled" Cancelling or modifying a cycle while underway..." a) During the delay period, it is preferable not to change any of the settings. If it is necessary, all of the settings must be cancelled Cancelling or modifying a cycle while underway by pressing the ON-OFF button (A) to indicate that all of the set- Premise : A cycle that is underway can only be modified if it has tings have been cancelled. only been running for a short time. Otherwise, the detergent may At this point, all of the steps for "Setting the Wash Cycle with a have already been used, and the appliance mayhave already delayed Start Time" and "setting and Starting a Wash Cycle" must drained the wash water. If this is the case, the detergent dis- be repeated, following the instructions contained in the correspond- penser must be refilled (see the paragraph entitled, "Loading ing sections. the Detergent"). b) If the door is opened during the delay period, the indicator will To modify a cycle that is already underway, press the ON-OFF blink and acoustic signal will sound, and the countdown will stop. button (A), then all of the settings will be cancelled. It will begin again when the door is closed . If you forget to load some of the dishes Wash Cycle adjustment Buttons The wash cycle can be interrupted by pressing the Start/Pause button. You can then load additional dishes and turn the appli- 1/2 load Button ance back on. The cycle will start where it left off. This button (see "close-up View - Control Panel", letter "C") makes Wash cycle Programme Light The wash cycle is running and the cycle indicator light (H) for the cycle will begin to blink. it possible to wash dishes using only the upper rack if there are not enough dishes for a full load. This will allow you to save on water and eletrical energy. It can be used before setting any of the wash cycles, except for the intensive cycle (if included in the At the end of the wash cycle Six acoustic signals will indicate that the wash cycle has finished wash cycle table). Please keep in mind that the amount of detergent should also be cut in half. and the cycle indicator light (H) for the cycle will begin to die out. Turn off the appliance using the ON-OFF button. Turn off the water supply to the appliance and open the door. Wait a few minutes before unloading the dishwasher to avoid handling the dishes and utensils while they are still hot and more susceptible to breakage. They will also dry better. .5. GB