Haier HF-248S User Manual - Page 5

Begin to use 1.Starting of the appliance For the initial use of the freezer, it is required to start it at least 3hours in advance of putting food. Switching on the appliance. When plugged in, the appliance shall automatically be set to position 3, and quick cooling to position 0, green power light I shall be turned on, and at the same time, red alarming light L shall be turned on together with buzzing sound. Press the buzzer can stop the buzzing sound. Green power light I indicates whether the appliance is switched on or not. When the temperature of the appliance has been lowered to required limit, green alarming light L shall be automatically be turned off. 2.Appliance working method Ｉ Ｌ Starting of the appliance Suggestion ！ No matter how ambient temperature changes, it can maintain optimum refrigeration effect without any other adjustment so long as you have selected the artificial intelligence, giving you much convenience. You can set the appliance by selecting one of the two modes according to necessity. (1) Artificial intelligence mode: if no other special demand, we recommend you to use the artificial intelligence. By pressing the artificial intelligence key to turn its indicating light on, then the appliance shall automatically work. (2) Manual adjusting mode: you can adjust and set the freezer temperature position according to food storage necessity (such as for quick freezing). (See the following "temperature setting and adjustment" in the later section of "function introduction"). 6 Function introduction Introduction of main panel IJ K L E M Ｏ G TEMP ℃ SF F AB C D F N H A. Power switch B. Unlock button C. Automatic mode D. Buzzer cancel E. Cold storage temperature increase F. Cold storage temperature decrease G. Freezer storage temperature increase H. Freezer storage temperature decrease E+F Temperature setting (after unlocking) G+H Quick freezing button (unlocked mode) G+H Cold storage temperature indicator button (locked mode) I Power indicator J Lock indicator K. Automatic mode indicator L. Over-temp warning indicator M. Temperature indicator N. Quick freezing indicator O. Error indicator Power control After switching on the appliance, green power light I on the above of power switch A shall be turned on. In order to prevent misoperation, it is necessary to press key A for 3 seconds in order to stop its power supply, then the indicating lights and display windows shall all be turned off, it shall stop cooling. If pressing the power key A again, the appliance shall resume working, and all indicating lights and windows shall all be turned on again. Locking and release After switching on, the appliance shall automatically enter a locking state, light J shall be turned off; by pressing key B, the locking shall be released, and light J shall be turned on. Artificial intelligence setting Under the artificial intelligence state, the appliance shall automatically adjust temperature control position according to the ambient temperature changes, without manual control. Press key C, and light K shall be turned on to enter the artificial intelligence state. Then quick freezing position is on 0 and it is impossible to set quick cooling. Also the temperature position is impossible to be set. To stop the state, press key C continuously for 3 seconds. At this moment, light K shall be turned off. 7