Haier HHV2230DBBB HHV2230 Manual - Page 10
Installing Hood
![]() |
View all Haier HHV2230DBBB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
English Installing Hood 1. Hang hood from (4) Mounting Screws (from parts bag). Be sure to place a washer (included) onto each screw before driving in the screw. Slide hood towards wall until mounting screws are engaged in narrow end of (4) Keyholes. Tighten mounting screws securely. KEYHOLE (4) 2. Replace bottom cover. MOUNTING SCREW (4) 3. Connect ductwork to hood. Use Duct Tape to make joints secure and air tight. DUCT TAPE 4. Install (1) PAR 20, 75W incandescent light. CAUTION: Bulbs may be hot! Refer to bulb packaging for further information. proper operation. 2000 series, purchased separately on 1000 series) in place of the aluminum 9
![](/manual_guide/products/haier-hhv2230sbss-hhv2230-manual-e5ddc26/10.png)
English
9
1.
Hang hood from (4) Mounting Screws (from parts bag). Be sure to place
a washer (included) onto each screw before driving in the screw. Slide
hood towards wall until mounting screws are engaged in narrow end of (4)
Keyholes. Tighten mounting screws securely.
2.
Replace bottom cover.
3.
Connect ductwork to hood. Use Duct Tape to make joints secure and air tight.
4.
Install (1) PAR 20, 75W incandescent light.
CAUTION:
Bulbs may be hot! Refer to bulb packaging for further information.
proper operation.
2000 series, purchased separately on 1000 series) in place of the aluminum
Installing Hood
KEYHOLE
(4)
MOUNTING
SCREW
(4)
DUCT
TAPE