Haier HHV2230DBBB HHV2230 Manual - Page 6
Preparing Hood
View all Haier HHV2230DBBB manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
English Preparing Hood 1. (Skip to step 2 if you have 1000 series model.) Remove 7" Round Duct Plate and 3¼" x 10" Damper from inside of the hood. Set duct plate and damper aside - with mounting screws. 7" Round Duct Plate 3¼" x 10" Damper 2. Remove tab holding aluminum filter in place.Pull down on filter tab and lift filter out. Set filter aside. Filters tab 3. Remove Wiring Cover from inside the hood. Set cover and mounting screws aside. 5
English
5
1. (Skip to step 2 if you have 1000 series model.) Remove 7” Round Duct Plate
and
3¼” x 10“ Damper from inside of the hood. Set duct plate and damper
aside - with mounting screws.
Filters
7” Round Duct Plate
3¼” x 10“ Damper
Preparing Hood
3. Remove Wiring Cover from inside the hood. Set cover and mounting screws
aside.
tab
2.
Remove tab holding aluminum filter in place.Pull down on filter tab and lift filter out.
Set filter aside.