Haier HL22XSLW2 Product Manual - Page 14

Operation Antenna or Cable. YYChannel Scan: Press VOL+/ENTER button to start to scan, press EXIT to cancel. Video Audio Channel Function Lock Channel Scan Status: Scanning... Analog Channels: 4 Digital Channels: 3 Antenna 40% EXIT Cancel All channels now available will be automatically preset in order .After the search has finished, the first program number will display on the screen. This search automatically adds only the active channels in your area to the TV's memory. It deletes any channels on which there is no broadcast or a poor signal. The channels found are automatically saved. YY Channel Skip:Press VOL+/ENTER button to enter the submenu, then press CH+/- button to select the channel number (eg.2) and press ENTER to confirm, a mark will be display in the pane as follows and this channel will be skipped next time you press CH+/- button but you can press digits button to select the channel. If you want to resume the channel, press ENTER button again. Video Audio Channel Function Lock 2 Analog 3 Analog 4 Analog 5 Analog 5-1 Digital 6 Analog 7 Analog 8 Analog 9 Analog 10 Analog Channel Skip ENTER Set CH+/VOL+/- Select EXIT Back YYChannel Labels: Allows you to name the channel that is selected. Press VOL+/ENTER button to enter the submenu. Video Channel Index 1 Channel Label Audio Channel Function Lock Channel Label Set CH+/VOL+/- Select EXIT Back Then press CH+/- button to select Channel Index and VOL+/- button to select the position of the item that you want to change, afterward press INPUT to input the numbers and symbols and ENTER button to confirm. YYTime Shifting Mode: To turn the Time Shifting Mode on or off. A Set the Time Shifting On, then insert the USB drive in the USB input. B Press PLAY/PAUSE to play or pause the program. If you want to stop time shift function, press the STOP button. -00:00:01 7:00 7:30 -00:00:01 7:00 7:30 1x 1.Time shift time. The time delay to the current program time. 2.Playback status: It shows the playback status (Play, Pause, Fast Forward, Rewind). 4 Play Fast forward Pause Fast reverse 3.Playback speed: playback speed can be changed 1x,2x,4x,8x,16x,32x. 4.Playback position: The playback position is always at the center of the time bar. 5.Time scale:shows the time in half hour increments. Note RR Time Shift function is only available in DTV mode. RR The maximum recording duration is determined by the memory size of the USB drive and the signal resolution. Please use a high-speed USB 2.0 drive with a minimum of 1GB capacity. RR Time shift only supports FAT32 file-system. RR Time shift supports more than 4GB recording by using multi-file storage. EN-13 Haier LED HDTV