Haier HLC19R1 User Manual - Page 14
VCR Setup, HDMI Input
UPC - 688057324234
View all Haier HLC19R1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Connection Instructions VCR Setup - To avoid picture noise (interference), leave an adequate distance between the VCR and TV Connection and use steps: 1.Read the user guide supplied with your AV devices and ensure that it has Composite or S-Video connectors; 2.Make sure that the power of the LCD-TV and the AV device are off; ATN IN Connection Option 1 Set VCR output switch to 3 or 4 and then tune TV to the same channel number. Pr R-AUDIO-L S-VIDEO IN R-AUDIO IN-L VIDEO Connection Option 2 1. Connect the audio and video cables from the VCR's output jacks to the TV input jacks, as shown in the figure. When connecting the TV to VCR, match the jack colors (Video = yellow, Audio Left = white,and Audio Right = red). If you connect an S-VIDEO output from VCR to the S-VIDEO input, the picture quality is improved; compared to connecting a regular VCR to the Video input. 2. Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner s manual.) 3.T.urn on the LCD-TV first ; and then turn on the power of the AV device; 4.Press t INPUT button to set the video input mode of the LCD-TV to S-Video mode or Video mode. COMPONENT IN 1 2 VCR Y Pb HDMI Input HDMI How to connect Connect the cables from the external equipment's output jacks to the TV input jacks, as shown in the figure. How to use 1. Select the input source by using INPUT button on the remote control or on the TV. 2. Operate the corresponding external equipment. Refer to external equipment operating guide. HDMI