Haier HLP021WM User Manual - Page 10
Quick Set-up Instructions For Normal - portable washer
View all Haier HLP021WM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
English Quick set-up instructions for normal wash 1. Locate the best place for using your NEW compact portable washer. Make sure it is near a 120 volt outlet and a water source, like a sink, with a drain. FRONT 2. Screw on the bottom plate with the six (6) screws provided. FACE TO FLOOR 3. Connect the water inlet hose, Using the Quick connect fitting, or directly connect to faucet. 4. Place drain hose in drain or inside the sink using the Drain Hook. Drain Hook Sink Faucet Silver Faucet Connector Quick Sink Faucet Adapter 5. Make sure the lint filter is in place, it is installed on the side of the drum. 6. Ensure nothing but clothing is in the washer, then plug power cord into a 15 AMP 110-120 VOLT, 60 HZ GROUNDED OUTLET ONLY. 7. Proceed by pressing the "POWER ON" button. Power 8. Select water height 9. Select "NORMAL" washing using the "CYCLE" button, then press the "START" button. Med i um High Low Manual Wat er Lev el CYCLE NORMAL Start Pause 9