Haier HLP23E Product Manual - Page 9

English Selecting the Wash Cycle • Press the "Program Select" button for your desired wash cycle. Choose between 6 options. • The total time includes the normal water inlet time and drain time. The total washing time may be affected by the water inlet pressure and water level. • The spin time is the time from the intermittent running to the finishing of the cycle. • In the "Heavy" program, the first soak is approximately 20 minutes, pre-wash is approximately 8 minutes. Clothes are soaked again for approximately 5 minutes. The washing, rinsing and spinning will then be completed. The wash time includes the pre-wash time. • In the "Quick Wash" program select wash, rinse and spin are set automatically. No procedure can be selected after setting. Note: When you turn the power ON, the machine will set the standard wash program to the wash/rinse/spin position. Selecting the Water Level • There are 4 water levels to chose from: Very Low, Low, Medium and High. Your selection may depend on your wash load. Note: Incoming hot water must not exceed 122˚F/50˚C. 8