Haier HLT15DC User Manual - Page 8

Cable TV (CATV) connection NOTE TO CATV SYSTEM INSTALLER This reminder is provided to call the CATV system installers attention to Article 820-40 of the National Electrical Code ( NEC ) that provides guidelines tor proper grounding and , in particular, specifies that the cable ground shall be connected to the grounding system of the building accurately, or as close to the point of cable entry as possible, use of this TV for o-ther than private viewing of programs broadcasted on UHF, VHF or transmitted by cable companies for the use of the general public may require authorization from the broadcast/cable company, and/or program owner. 1:--- A75-ohm coaxial cable connector is built into set for easy hookup. When connecting the 75-ohm coaxial cable to the set, place the 75-ohm cable into the ANT terminal. ;---- Some cable TV companies offer premium pay channels. Since the signals of these premium pay channels are scrambled, a cable TV converter/descrambler is generally provided to the subscriber the cable TV company. This converter/descrambler is necessary for normal viewing scrambled channels. ( Set your TV to channel 3 or 4, typically one of these channels are used. If this is unknown, consult y-our cable TV company.) For more specific instructions on installing cable TV, consult your cable TV company, one possible method of utilizing the covered /provided by your cable TV company is explained below. RRF switch (Not included) A OUTri IN B 2 set signal splitter ( Not included ) Cable TV Line Cable TV converter/ descrambler ( Not included ) Please note: the RF switch is required to provide two inputs (A and B ). ( not included ), A position on the RF switch (not included); you can view all unscrambled channels by using the TV channel keys. B position on the RF switch (not included ); you can view all scrambled channels via the converter/descrambler by using the converter channel keys. -------___ 7