Haier HM-07C03 User Manual - Page 10

Maintenance The power line should be pulled off before cleaning. • Maintenance should be performed after the machine stops running, that is to say,the power is switched off,so as to avoid accidents of electric shock. In cleaning do not use solvent like benzol, alcohol, glazing agent, etc,or it may result in fish tail, cracks, or changing in colors. 0 C53 b nzo Avoiding electric schock Air-purifying screen • If the active carbon air screen gathers too much dust,the air rate will be weakened.Therefore it should be cleaned at least every two weeks. Dismantling the filter bar 1) Hold the handle of the filter bar,pull it open,and take out the bar upwards. 2) Take out the active carbon air screen from the protecting Filter screen cover of the filter screen. Handle Clean the air filter screen Put the active carbon screen into the warm water (about 40°C) with neutral detergent to clean it,then dry it at ventilating shadow. Install the air screen and filter bar Fix the active carbon air screen at the clamp of the filter bar. Filter bar 1) Put the clamp of the lower part of the screen protecting cover at the position of corresponding clamp hole.Push the handle to positioning. Clean the shell Clamp (six) Clean the dirt with cloth soaked with neutral detergent,then wipe off the detergent with clean cloth. Clean the water tank 1) Hold the handle of the water tank,and pull out gently. 2) After pouring the water,clean the dirt with neutral detergent (about 40°C)wash and dry it completely, then push it into the machine. -9-