Haier HPC12XCR Use and Care Manual - Page 10
Control, Panel, Operation
View all Haier HPC12XCR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Control Panel Operation I English VI HPC12XCR HPC1OXHR HPC12XHR BUCKET FULL O POWER BUCKET FULL O POWER TIMER ( =$ C2)1 TIMER ti MODE COOL O 88 DEHUM O HOIGH Haier MED `OOw \./ SPEED TEMP/TIME 6 TIMER O HEAT O F.)) TIMER L MODE COOL O DEHUM fO O 0 UU HOIGH Hcrier MED LO 1+) SPEED TEMP/TIME CU Power On / Off Mode: Press this button to change the operation mode. COOL: LED lights when in cooling mode. DEHUM: LED lights when in dehumidification mode. FAN : LED lights when in fan mode. HEAT: LED lights when in heat mode (applies only to heat and cool models). O Fan Speeds: There are 3 speeds in the cool and fan modes: Low, Medium, High. In dehumidification mode, and room temperature is grater than 77T, fan speed can be adjust; otherwise fan speed is fixed to "low". On / Off Timer: The timer can be used to automatically turn on or off the air conditioner. To automatically turn on the air conditioner, set the timer while the power control is in the OFF position. 1. Turn off the air conditioner. 2. Press the Timer button. 3. Press the (") or (\/) button to change the delay start time from 1 to 24 hours. To automatically turn off the air conditioner, set the timer while the power control is in the ON position. 1. Turn on the air conditioner. 2. Press the Timer button. 3. Press the (/\) or (\/) button to change the delay stop time from 1 to 24 hours. To clear the timer setting: 1. The power control can be either in the on or off position. 2. Press the Timer button. 3. Press and hold the (\/) button until the timer display has been cleared. Time / Temperature Set Control: The (/\) and (\/) buttons can be used for adjusting the timer and temperature settings. To set the timer: See "On / Off Timer" instructions above. To set the temperature: While in the Cool mode, press the (/\) or (\/) button to raise or lower the temperature. The set temperature is displayed and may be adjusted. The temperature can be set between 61°F and 89°F (Cool mode) and 61°F to 77°F (Heat mode). After 10 seconds the display will revert back to the room temperature. NOTE: The temperature cannot be adjusted in the fan or dehumidification modes. When the " BUCKET FULL " indicator flashes, the internal water tank has filled with condensed water and the air conditioner will turn off automatically. See the "Storage" section for directions on draining the water from the air conditioner. 7 9