Haier HPIMD25S Product Manual - Page 8
Operating Instructions
UPC - 688057396828
View all Haier HPIMD25S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
English operating instructions Starting Off: 1. Open the access door on the front, right hand side of the unit, insert provided funnel, and pour potable water (bottled water suggested) into the reservoir. Keep water level below the "MAX" water level mark on the inside wall of the reservoir. NOTE: If water is accidently filled above "MAX", it will be channeled down the front of the unit and end up on the surface below. Maximum Water Level Fill the water here Funnel 2. Remove funnel and close reservoir door. WARNING: Do not pour water into ice storage compartment located on top of the unit. This will affect the ice making performance. Only pour water into the Water Reservoir Tank located on the front, right hand side of the unit. 3. Plug the unit into a grounded, 120V/60Hz outlet only. Push the ON/OFF button on the control panel to turn ON the machine to begin the ice making cycle. You will hear the compressor and water flowing over the evaporator. The LED indicator just above the ON/OFF button will also light. 4. Each cycle produces 9 cubes of ice. The ice making cycle takes about 6 to 15 minutes, depending on the ambient (room) temperature. Ambient and initial water temperatures affect the actual ice making time. It is not suggested to try making ice if room temperature exceeds 90˚ degrees farenheit as ice making time may vary greatly. 5. The default size of the ice cube is medium. If you want small size cubes, press the "Select" button on the control panel and the LED indicator should switch from "M" to "S". If room temperature is lower than 60˚ degrees Fahrenheit, it is recommended to select small size cubes. 7