Haier HPU-20CU13 User Manual - Page 16

Operation Sleep Operation Display board TEMP SLEEP Before going to bed, you can simply press the SLEEP button and unit will operate in SLEEP mode and bring you a sound sleep. Use of SLEEP function After the unit starts, set the operation status, then press SLEEP button before which the clock must be adjusted and time being set. Operation Mode 1. In COOL,DRY mode 1 hours after SLEEP mode starts, temp. will become 1OC higher than temp. setting. After another 1 hours, temp. rises by 1OC further. The unit will run for further 6 hours then stops. Temp. is higher than temp. setting so that room temperature won't be too Iow for your sleep. Remote Controller SLEEP operation starts SLEEP operation stops Approx.6hrs 1 hr Rises 1OC 1 hr Rises 1OC Temp.setting Unit stop In COOL, DRY mode 2. In AUTO mode The unit operates in corresponding sleep mode adapted to the automatically selected operation mode. 3. In FAN mode It has no SLEEP function. 4.Set the wind speed change when sleeping If the wind speed is high or middle before setting for the sleep, set for lowing the wind speed after sleeping. If it is low wind, no change. 15