Haier HRF-250S User Manual - Page 4

How To Install Your Refrigerator ENSURE THAT: IMPORTANT: It is installed and levelled on a floor capable of holding its weight when fully loaded. It is sited in a dry, sheltered place, away from heat and direct sunlight. You install your refrigerator well away from inflammables, such as petrol, kerosene, etc. Leave at least 7.5cm air space on top of the refrigerator and 2.5cm rear space (between the back and wall). This allows air to circulate freely and helps stop condensation on the cabinet. It is only used for jobs designed for refrigerators. Your refrigerator is cleaned before use. Your refrigerator must only be connected to a 230 10 volts, 50Hz A.C. power supply; failure to do so may invalidate the guarantee. A 13 amp, 3 pin plug and a 5 amp fuse only must be used for this refrigerator otherwise damage may result. The plug should always be wired in accordance with the following codes: Green and Yellow - EARTH (E) Blue or Black - NEUTRAL (N) Brown or Red - LIVE (L) If you are in doubt, consult a qualified electrician. Switch on and turn the temperature control knob to number 4 setting. Allow the fridge to become properly cold before loading with food. WARNING This appliance must be earthed. Do not carry the refrigerator by its door and the piping of the condenser, as this is dangerous! MODEL 12Month's Guarntee Capacity HRF-250S YES 232Ltr. HRF-300R YES 290Ltr. Voltage Total Input Power Energy Consumption Refrigerant Unit Size (WxDxH) Net Weight 220v, 50Hz 130W 1.0 kwh / 24hr R134a 120 g 550x580x1410 62KG 220v, 50Hz 130W 1.3kwh / 24hr R134a 180 g 596x610x1490 64KG Automatic Interior Light YES YES Lock YES YES Adjustable Feet YES YES Adjustable thermostat YES YES Drain Facility YES YES Note: All capacities are gross. reserves the right to change specifications as part of its policy of continuos improvement 2