Haier HSBS582AS User Manual - Page 11

Setting up the Refrigerator/Freezer Combi Be sure to choose a flat and level setup location. Use sturdy and fireproof supports to correct an unevenness in the floor. Turning an appliance foot clockwise raises the appliance, turning it anticlockwise lowers the appliance. Door adjustment If the freezer compartment door is lower than that of the refrigerator compartment, insert the wrench in the groove of the left screw and turn it in the direction of the arrow until both doors are the same height. Height difference Height difference Wrench Left screw Protect the setup location against direct sunlight or heat sources. If the freezer compartment door is lower than that of the refrigerator compartment, insert the wrench in the groove of the left screw and turn it in the direction of the arrow until both doors are the same height. Height difference Height difference Right bolt Wrench Avoid a damp setup location. Remove water and dirt with a soft rag. Be sure to leave at least 10 cm of space around the appliance. When installing the appliance in an enclosed area, leave at least 25 cm of space on the sides and 5 cm on the top and back. Spacing 9