Haier HSU-18HRA03 User Manual - Page 16

Operation Dry Operation (1) Unit start Press ON/OFF button, unit starts. Previous operation status appears on display. (Not Timer setting) (2) Select operation mode Press MODE button. For each press, operation mode changes as follows: AUTO COOL DRY HEAT FAN Unit will run in operation mode displayed on LCD. Stop display at your desired mode. (3) Select temp. setting Press TEMP button. Every time the button is pressed, temp. setting increases 1oC Every time the button is pressed, temp. setting decreases 1oC Unit will start running to reach the temp. setting on LCD. (4) Fan speed selection Press FAN button. For each press, fan speed changes as follows: HEALTH ON/OFF 51 FAN 4 MODE 32 3 SWING TIMER CLOCK SET SLEEP LOCK RESET AUTO LO MED HI Unit runs at the speed displayed on LCD. In DRY mode, when room temperature becomes lower than temp.setting+2oC,unit will run intermittently at LOW speed regardless of FAN setting. (5)Unit stop Press ON/OFF button, the unit stops. COOL operation starts when room temp. is higher than temp. setting. Ultra-low air flow Temp. setting+2oC Temp. setting On reaching temp. setting, unit will run in mild DRY mode. Hints On cooling only unit, heating mode is not available. Remote controller can memorize each operation status. When starting it next time, just press ON/OFF button and unit will run in previous status. No reelecting is needed.(TIMER ON/OFF、SLEEP、SWING needs reelecting) 11