Haier HT18TS45SW HT18TW10SW - Page 15
Operation Instructions - refrigerator model
View all Haier HT18TS45SW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
ENGLISH OPERATION INSTRUCTIONS LIGHTING All models come with an interior light located on the ceiling of the refrigerator compartment. For models with a single bulb, no cover is provided. For models with dual bulbs, a cover is provided. Some models may feature a light in the freezer and/or a "mid-level" light on the back wall of the refrigerator above the crisper. Please see the Proper Care and Maintenance section for light bulb replacement instructions. FREEZER LIGHT (NOT ALL MODELS) To Remove Freezer Light Cover (if included): 1. Pull the cover to the front of the cabinet. REFRIGERATOR UPPER LIGHT W/ COVER (NOT ALL MODELS) REFRIGERATOR INTERIOR SHELVES All refrigerator models include shelving that can be adjusted to suit your personal storage needs. Depending on model, shelves can be wire or encapsulated glass, full-width or half-width. To Remove Upper Light Cover (if included): 1. Push in the tab at the far end of the cover. 2. Rotate the far end of the cover down. 3. Push the cover toward the back of the compartment. FULL-WIDTH WIRE AND ENCAPSULATED GLASS SHELVES Can be adjusted to four different levels. These shelves slide in and out by lifting the front of the shelf and gently pulling it towards you. REFRIGERATOR MID-LEVEL LIGHT (NOT ALL MODELS) To Remove Refrigerator Mid-Level Light Lens (if included): 1. Push up on the bottom of the cover. 2. Rotate the bottom of the cover away from rear of compartment. 3. Lift the top of the cover up and out. HALF-WIDTH ENCAPSULATED GLASS SHELVES Can be set to 4 different levels and can be moved independent of each other, giving you the widest variety of shelving options. Keep in mind that refrigerators with half-width shelving only have a support track in the center of the refrigerator back wall. Right-hand and left-hand shelves can't be interchanged. PAGE 13 • SET UP & USE