Haier HWB1260 Operation Manual - Page 9

Preparation 1.Power supply 2.Water supply Plug in the power supply 220-230V~/50HZ Turn on the tap ensure that the water in clear. Caution:Before staring the washing machine turn on the water faucet to ensure the water faucet and the water inlet hose are connected correctly and do not leak. 4.Detergent selection Only special low foam detergent should be used in automatic drum washing mashine,form blended or wool fabrics special deter-gent should ne used.dry clearning solvent should not be used such as trichhloroethy-lene or alike (caution :load the required amount of detergent only). 3.Laundry treatment Sort out clothes according to type and extent of dirt.There are three types of clothes:cotton,synthetical and woolen (silk) fabrics. Separate white clothes from colored.If whites and coloreds are combimed for one load,make sure the coloreds are colorfast. -Clothing with frayed edges or yams should be put in a wash bag or special bag before washing. -repair damged clothing,lose buttons or damaged zips and hooks before washing. -Bed sheets and table ware should be loosely loaded and not folded. This washing mashine is for househould use and designed for mechanically washable clothes.When washing,separate unwashable clothes with reference to clothes labels. Functions Note. If Program key is turned after reservation time is set and before program starts, the reservation will be automatically cancelled. When reservation feature is activated, the washing start time is fixed. There will be some difference between the reserved time and the actual program completion time due to different water inlet time and load distribution condition during spin-dry process. E. LCD LCD is a window to display information including washing status, washing progress, reservation time, remaining time, heating temperature, spin-dry speed, load selection and error etc. as well as to display additional features such as power clean, super clean rinse and foaming auto-check etc. F. Start/Pause Key When the washer is energized, select the desired washing program and press the Start/Paus key. The indicator lamp on the upper left corner of the key will illuminate to indicate that the washer has started operation. If it needs to pause the washing process, simply press the Start/ Pause key and the indicator lamp and remining time display will blink and the washer enters into condition. Press the Start/Pause key again to resume washing process. (Note: Press the Start/Pause key only after the desired program and feature are set. G. Power Clean Key Press the key to increasewashing time of current program selected. This feature is appropriate for washing heavily-soiled clothes. The Power Clean icon in the LCD will illuminate after the feature is selected. (This feature is not available in certain programs .Please refer to Program Setting Guidance Table for details.) H. Temperature Selection Key Press the key and LCD will display the selected heating temperature, which is adjustable as needed. Note: 20oC means cold water washing and no heating is involve.d. I. Spin Speed Selection Key Press the key and LCD will display the selected spin-dry revolution speed, which is adjustable as needed. (When No Spindry -feature is selected, the time will decrease correspondingly.) J. Load Selection key Turn the Program Knob to select the desired program (see Program Setting Guidance Table) Press the key and manually select different programs and power-saving and water-seaving feature based on the volume of load. LCD will display L-1(2,3,4,5), indicating the washing load is 1 (2,3,4,5) kg and program time will change accordingly. (The feature is not available in Wool, Cashmere, Silk, Speedy, Drainage Only and Spin Only Program. Only L- 1, 2, 3 are available for Chemical Fiber program. )