Haier HWM-6.5 User Manual - Page 15

3 Press the button of "PROCEDURE SELECTION" to select suitable processes. PROCEDURE SELECTION After the power is switched on, the washing machine will automatically set a normal program comprising of processes of "Wash, Rinse and Spin" . If other program is desired, press the button of "Process" to select one or several process of soak, wash, rinse and spin. Refer to the paragraph "Processes selecting". Page 10 Attention Even there's no water in the tub, the spinning will start after a certain period. Do not use soak process for woolen laundries. Wash the laundries that are prone to lose color separately from other laundries. The pulsator will not rotate unless the water is filled to selected water level. Selection method of the procedure programs Times of pushing Selected procedure the"select"button program Applicable procedure Contents(the lighted indicators indicate the programs about to run) 0 Wash, rinse, spin When the common laundries need washing, rinsing and Soak Wash Rinse Spin spinning. 1 Wash(the washing liquid remains in the Repeat using the washing tub) liquid Soak Wash Rinse Spin 2 Wash,rinse(the rinsing liquid remains in the tub) The laundry needn't spin to avoid wrinkles Soak Wash Rinse Spin 3 Rinse,spin When the laundries need rinsing and spinning after manual washing Soak Wash Rinse Spin When the laundries need only Soak Wash Rinse Spin 4 Spin(spin after drain) spinning after manual washing (first drain then spin) 5 Soak,wash,rinse,spin If the laundries are very dirty, Soak Wash Rinse Spin or the sleeve and collar are dirty, first soak then wash If you push the "PROCEDURE SELECTION" button for 6 times, it will resume the original mode, and it will circulate like that. If you select the"QUICK WASH" program, you have to set the full procedure of wash, rinse and spin. The procedure can not be selected. 13