Haier HWM-6.5 User Manual - Page 16

4 Press the "WATER LEVEL" button to select suitable water level WATER LEVEL SELECTION After switching on the power, press the button "WATER LEVEL" to select a water level according to the load. Please refer to the button " Water level" on page 10. Page 10 5 Push the " RESERVATION/CALEFACTION" RESERVATION button to select suitable reserv e progra m CALEFACTION After switching on, the washing machine reserved wash program will be automatically set inactive. If you desire a wash cycle to end at a reserved time, you can press the "RESERVATION/CALEFACTION"button to set a reserved wash program. Refer to The button of "RESERVATION/CALEFACTION" on page 11. Confirm the reserve program Page 11 When "Reservation" becomes active, the nixie tube displays the time to the end of the reserved wash cycle, and the indicator turns on. To change the running program or cancel the reservation, you should cut off the supply and reselect. Confirm the heating function the washing will finish about 18 hours later Keep pressing the "RESERVATION/CALEFACTION" button for more than 2 s, the heating indicator turns on (red). Keep pressing the "RESERVATION/CALEFACTION"button for more than 2 s again, the heating indicator turns off and heating function is cancelled. After the machine starts running, if selection or cancellation of heating function is desired, you should switch off the power and reselect. 6 Press the "start/pause" button START PAUSE Close the top lid Except water filling (excluding heating function) and draining process, if the top lid is opened, the machine will stop running and alarm. Finish washing The washing machine cuts off the power supply automatically when wash cycle ends. 14