Haier HWM1270KFL User Manual - Page 7

Operational Functions HWM 1270 KFL 400-1200rpm Spin Speed 7kg Load Capacity / . Temp. Speed Easy lroning Time Delay Prewash Extra Rinse Super Wash Load  ON/OFF Coloured Synthetic Normal Intensive Delicate Wool Rinse Spin Start Quick $Ironing-free button Press this button, and the laundry will be fluffed up at the end of the spinning cycle to reduce wrinkles. B:Delay button Press the Delay button before the program is started if necessary. Press the Delay button once and, the delay time will increase by one hour (the regulating range is from the current setting to 24 hours). After the delay time is changed, press the Start button to activate the delay function. Note: The delay time must be longer than the program time; otherwise, the washing machine will start the wash program directly. C:Prewash button Press this button and the washing machine will automatically start a prewash cycle during execution of a washing program. D: Extra rinsing button Press this button and the washing machine will run an additional rinsing cycle to further clean your clothes. E: Super wash button Press this button,the display will turn on . The " " and " " will display . The super wash sign will turn off when the super wash program has finished. F: button Press this button, 3 load levels 0-2kg 2-4kg) and "ϝϝϝϝ" (4-7kg) will appear on the screen for manual selection before water is filled. After the load is set, the water content will be automatically adjusted. G: Power button Press this button to switch on the washing machine; press it again to switch the machine off. To cancel a wash program during a wash cycle,please switch the machine off.  Hints for Saving Energy 4. Setting wash temperature Press the temperature button until "_ _ oC" is displayed, select an appropriate temperature as required (refer to the "Guide to Operational Program Selection"). 5. Function buttons Select functions as required (refer to the "Operational Functions" section). 6. Washing Press the Start / Pause button, the indicator at the upper left corner of the button will blink and the washing machine starts operation. 7. Finish The washing machine will stop operation automatically when a wash cycle ends. The "End" sign will appear. Open the door and take out the laundry. Then turn off the tap and unplug the power cable. ƽ Hints for saving energy During operation 1. Collect clothes for one full wash load. 2. Do not overload the washing machine. 3. Pre-wash heavily soiled clothes. 4. Reduce the amount of detergent or choose standard or delicate wash programs for slightly soiled clothes. 5. Choose a proper washing temperature. Only exceed 60ć for heavily soiled clothes. 6. Do not use more detergent than required. 7. Softening agent makes clothes feel softer and easier to iron.