Haier HWM50-10B User Manual - Page 7

How to change the direction of the drain hose 1.Dismantle the back cover of the washing machine. 2.Put down the drain hose. Take off the drain hose frame. As indicated in Figure 1, put the drain hose into the cabinet. Then stretch one hand into the cabinet to nip the claw of the drain hose bushing to remove the claw from original position. Take off the drain hose bushing with the other hand. (As indicated in Figure 2 and 3). 3.Dismantle the protecting cover of the drain outlet at the other side (method the same as the bushing). Install the bushing as per indicated in Figure 4. 4.Extend the drain hose from the other side. Fix the drain hose onto the base frame with the drain hose frame. (As indicated in Figure 5) Drain outlet protecting cover Outer drain hose Drain hose frame Drain hose bushing Figure 2 Figure 1 Cabinet Drain hose bushing claw Inner Outer Press Drain hose bushing Take off Press Figure 3 Drain hose bushing Figure 4 Figure 5 5.Install the protecting cover of the drain outlet at the other side as per indicated in Figure 6. Figure 6 Usage of the drain hose The drain hose shall drain smoothly 1.The height of the drain hose shall be less than 10cm, or the drainage will not be smooth, and cost such long time that the machine may stop at mid way. 2.Do not trample or press the drain hose. 4.If extra drain hose is needed, please make separate purchase. The inner diameter of the extra hose shall not less than 30mm, and the length shall not exceed 1.5m. > 30mm