Haier HWM60-10 User Manual - Page 15

3 Press the "WATER LEVEL" button to select suitable water level WATER LEVEL After switching on the power, press the button "WATER LEVEL" to select a water level according to the load. Please refer to the button " Water level" on page 10. Page 10 4 Push the " PROGRAM/DELAY TIME" button to select suitable reserve program PROGRAM DELAY TIME After switching on, the washing machine reserved wash program will be automatically set inactive. If you desire a wash cycle to end at a reserved time, you can press the "PROGRAM/DELAY TIME"button over 2 seconds to set a delay time wash program. Refer to The button of "PROGRAM/DELAY TIME" on page 10. Confirm the delay time program Page 10 When "Delay time" becomes active, the nixie tube displays the time to the end of the delay time wash cycle, and the indicator turns on.During delay time procedure,push the "Delay time" button to display the delay time mode. To change the running program or cancel the delay time, you should cut off the supply and reselect. the washing will finish about 18 hours later 5 Press the "start/pause" button Close the top lid Except water filling ,washing,rinsing and draining, if the top cover is opened, the washing machine will stop running and alarm. Finish washing The washing machine cuts off the power supply automatically when wash cycle ends. START PAUSE START PAUSE 13