Haier HWM60-10 User Manual - Page 6

Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the lint filter Install the bottom plate 1.Press downward to assmble. 2.Pull upward to detach. After you open the package, please lean the washing machine gently down on soft items ( like the towel cloth, blanket, etc. ). Install the bottom plate to the bottom of the machine with the five screws by a cross screwdriver, then l ift the machine up gently. See to the figure: Pull down Put up Back Front Soft items Screw Bottom plate Adjust the installation position The largest allowed slope of the shank base of the machine is 2 . The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods: Adjust the adjustable foot: 1.To twist the adjustable foot, please first lift up the side of the foot slightly, loosen the adjustable nut, and twist the foot. 2.Fasten the nut after adjustment. Loosen High adjustable nut Fasten adjustable foot Low 4