Haier HWM60-10A User Manual - Page 12
Push the operating button - 10
View all Haier HWM60-10A manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
4.Push the operating button Using process a Function of operating buttons State and signification of indicator light The frame of indicator is not lighted. the frame of the indicator is flashing : indicate the running program. the frame of the indicator is on : indicate the program about to run, or indicate the selected mode the frame of the indicator is flashing rapidly: indicate abnormal condition. Digital tube Funny adjustment of time and degree, when selecting water level, it displays parameter During working , it displays the remained reserve time (min). During reserve, it displays the remained reserve time (h) In case of trouble, it displays the abnormal symbol (see to page 16) Page 16 RESERVE WATER LEVEL SOAK WASH RINSE SPIN RESERVE button During operation, the digital tube will display the remained time before finishing in minute. Push the reserve button. The digital tube will display the reserve time for finishing of washing in hour. The indicator will flash to indicate that the reserve function is working. RESERVE WATER LEVEL button You need to select the water level by yourself. During the working state, if you want to select water level, you must push START/PAUSE button firstly and then select water level. If you put in wet laundries, you need to select suitable water level manually. Refer to Selection of water level, water quantity Page 9 and powder quantity in page 9. In selecting the quick wash program, VFD displays10 (min) ,the water level isset to 2 automatically. When the 2 is reached, it will do washing while filling water. When 4 is reached, it will perform normal washing. Due to the variable cloth and humidity, the set water level may be different from the actual water level. Sometimes it may perform water adding. During washing, pushthe water level knob to addwater. PARAMETER SETUP button Set up the parameter of different procedure, that is setting up soak time(min), wash time(min), rinse times(time), spin time(min). Remarks: pushing PARAMETER SETUP button, the machine comes into self-programme function, push PROGRAM button to select SOAK, WASH, RINSE OR SPIN procedure , when referring soak time, wash time, rinse degree or spin time is displayed on VFD, then you can push PARAMETER SETUP button to adjust soak time, wash time, rinse degree or spin time by yourself. After pushing START/PAUSE button to start the machine, you can not set up the parameter of different procedure.