Haier HWM60-10A User Manual - Page 18

Using process Push the PARAMETER SETUP to set up the parameter of each program Pushing PARAMETER SETUP button, the machine turn into programme function, where we assume that you set up the spinning time 6 min. When the WASH light blinks, push PROCESS button until the SPIN light blinks, and then push the PARAMETER SETUP button until 6 is displayed on the digital tube. Push the RESERVE button to set the proper finishing time of wash. After switching on the power ,RESERVE program is defaulted in locking state ,where we assume that you would not setup the RESERVE function, that is the relevant indicator light does not blink. Push the START/PAUSE button The above programme function is based on the tolerant STANDARD program ,with which the setup of this function based on other program is the same. When you set the soaking time,please push the PARAMETER SETUP button before selecting the SOAK process, when the relevant indicator light blinks. After pushing the PARAMETER SETUP button to turn into programme function, the indicator light of relevant process which is selected blinks. If we do not push the PARAMETER SETUP or PROCESS button in 3 min , the relevant indicator light will not blink and the programme function abate automatically. Parameter range of each program and process(min) Soaking time Washing time Rinsing time Spinning time STANDARD about0~35 about0~20 about0~4 about0~8 JEANS about0~35 about0~20 about0~4 about0~8 GENTLE about0~20 about0~4 about0~8 Soaking time adds from 0 to the max 35 and then returns to 0. Washing time,rinsing time and spinning time add from 0 to the max and then return to 0. When the digital tube displays - - ,which indicates the number is 0.