Haier HWM60-15P User Manual - Page 10
Washing sequence
View all Haier HWM60-15P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Washing sequence Water-filling selector handle Overfilling sign Wash timer (To set to below 2 minute, first set to 6 minute then turn it back. it can increase the service life of the timer). Wash selector (Standard current, strong current) Water-filling entrance Buzzer (The buzzer will ring when the washing finishes) Spin timer (to set to below 1 minute, first set to 2 minute then turn it back. it can increase the service life of the timer). OFF 15 3 12 6 WASH TIMER 9 STANDARD STRONG DRAIN WASH SELECTOR OFF MAX BUZZER OFF 5 1 4 2 3 SPIN TIMER Wash 1.Water inlet selector (1) Set the water inlet selector at the "WASH" side. (Figure 1) (2) Set the water level adjusting lever to needed line. 2. Fill the water and add the dissolved washing powder to make the water level reach the preset position. (Figure 2) Run washing program for some time to stir and dissolve the powder completely. 3.Put in the laundries. If the water quantity is insufficient, please add water. 4.Select the current. Select the strength of the current according to the laundries. (Figure 3) WASH SPIN Figure 1 STRONG STANDARD Figure 2 DRAIN WASH SELECTOR Figure 3 OFF 5.Select the washing time Select the washing time according to the laundries. (Figure 4) 6.After washing, the buzzer will ring. Set the "WASH SELECTOR" at "DRAIN". (Figure 5). WASH TIMER Figure 4 STRONG STANDARD DRAIN Figure 5 WASH SELECTOR 8