Haier HWM60-728 User Manual - Page 13

PROCESS C "PROCESS" button You can choose one or more processes among soak, wash, rinse and spin. The button is invalid if you choose QUCIK or TUB DRY program. You can not choose soak process if you choose WOOL program. D "WATER LEVEL" button WATER LEVEL When the standard program is selected, the washing machine can detect the laundries automatically. After detection, it will set the water level to suitable value automatically among the water level LOW , MEDIUM , HIGH and MAXIMUM . You can also set water level by yourself. After the machine is started, it will not set water level automatically. You shall push the START/PAUSE button to make new setting. If there's water inside the tub, the machine can not detect the laundries and will display water level MEDIUM .If wet laundries are put in, it may display water level MAXIMUM . If the Quick program is selected, it will display water level LOW . The water level can not be adjust. During operation of wash , rinse and soak program, you can push down the water level button to add water. When you release the button, or it reaches the overflow water level, the machine will stop adding water. The water level decided may be different from actual value because of the different moisture level of the laundries. E "DELAY " button The digitron displays the total remaining time before washing is finished (in minutes) DELAY Push the "DELAY"button, the digitron displays the delay time of washing (in hours). The indicator flashes to indicate that the delay function is operating. Push the "DELAY "button to display the delay mode. REMAIN(MINUTES) F REMAINING(MINUTES) indicator digitron RESERVE(HOURS) During sensing, it displays -- . During delay procedure, it displays the remaining delay time (in hours) During operation of programs, it displays the remaining time in minutes. In case of abnormal phenomenon, it displays the abnormal symbol (see to Page 16) Page 16 START/PAUSE G "START/PAUSE " button After the power is switched on, press it to start the machine During working, push it to pause. During pause, push this button to restart and go on working. 11