Haier HWM60-728 User Manual - Page 17

Disposal after washing After using, please clean the lint and foreign materials of the lint filter etc. in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Clean the detergent box with water. The method of dismantlement and installation refer to the usage of the lint filter. Install Dismantle Detergent box The lint filter must be used during washing. It must be cleaned in time after each using. The methods of dismantling and installing lint filter as follows: 1.Push down the spring piece of the top lint filter to make the claws out of the filter cover, and then pull out the lint filter to get it down. 2.Pull the back cover of the lint filter, and then you can get down it off the front cover of the lint filter. 3.Sweep the rubbish in the lint filter. 4.Put the back cover of the lint filter into the front cover . 5.Put the lint filter into filter cover, and make it tight 6.Make sure the lint filter is well installed, or it can influence your use. Filter cover install The front cover of lint filter dismantle The filter screen of the water inlet valve is likely to be blocked by foreign materials and influence the water inlet. Please clean it with brush every two months. The back cover of lint filter If the cabinet is dirty, wipe it with wet cloth Do not flush it directly with water. Wipe it with neutral detergent. Do not wipe it with thinner, petrol, alcohol etc. Petrol Thinner Alcohol 1.After washing, close the water faucet. ( If needed, you can dismantle the water inlet hose). 2.Do not store water in the washing machine for a long period. Drain the water completely after each using. 3.Be sure to pull off the power plug before maintenance. 4.Hang up the power cord and drain hose. 5.Wipe off the water drops on the surface of the machine and inside the tub. Open the top lid for some time (about 1 hour), then close the top lid. 15