Haier HWM65-0566 User Manual - Page 9

4 Use the operation buttons a Description of the function of buttons Indicator mode and meaning Flashing, indicating the running program On, indicating the program about to run or the selection mode "Start/pause" button After the power is switched on, press it to start the machine During working, push it to pause. During pause, push this button to restart and go on working CHILD LOCK FUNCTION Push and hold the WATER LEVEL button and SPIN button, then push down the POWER ON/OFF button. The digitron displays CL . After setting, push downthe START/PAUSE button. The child lock function isactivated. All of the buttons are locked and cannot make selection. Release the child lock function: push down the RESERVE and SPIN button at the same time for more than 2 seconds. After a beep sound, the child lock function is released. Soak Wash Rinse Spin 30 Soak Wash Over flow Rinse Spin SOAK button Push the SOAK button to set the soak procedure. During STANDARD NORMAL and JEAN programs, push the SOAK button to set different soak time (10,20,30 minutes) During FIBER program, push the soak button to select soak procedure, but the soak time cannot change. During QUICK and WOOLLEN programs, push the SOAK button, the machine have no reaction. WASH button Push the WASH button to set the wash procedure. During STANDARD NORMAL and JEAN programs, push the wash button to set different wash time (6,9,12,15 minutes) During FIBER program, push the WASH button to select wash procedure, but the wash time cannot change. During QUICK WOOLLEN Programs, push the wash button the machine have no reaction. RINSE button Push the RINSE button to set the rinse and procedure. During STANDARD NORMAL and JEAN programs, push the RINSE button to set different rinse times ( 0, 1, 2, 3, 4times). While the "Overflow" digitron is lighting,the program of the overflow rinse has been selected. During FIBER programs, push the RINSE button to select rinse procedure, but the rinse times cannot change. During QUICK , WOOLLEN programs, push the RINSE button, the machine have no reaction. SPIN button Push the SPIN button to set the spin procedure. During STANDARD NORMAL and JEAN programs, push the SPIN button to set different spin time(1,3,5,7minutes) During FIBER program, push the SPIN button to select spin procedure, but the spin time cannot change. During QUICK , WOOLLEN , programs, push the SPIN button, the machine have no reaction. Connection between the water inlet hose and the washer 1.Do not take off the water absorption cushion. Please check if the cushion is dropped or damaged before each usage. If it happens please contact our after-sale department immediately. nut of the water inlet hose 2 Put the nut of the water inlet hose on the valve jointer. 3 Fasten the nut. Swing it gently to confirm if it's suitable. jointer of the water inlet valve water absorption cushion. Connection between the jointer of the water inlet hose and the water inlet hose 1.Push down the slider. Insert the water inlet hose into the jointer. Locking level 2 Hang the lock lever to the jointer. Release the slider till a click sound is heard. the jointer of the water inlet hose Slider Check the connection between the jointer of the water inlet hose and the water faucet 1.Swing the hose gently to confirm if it is fastened stable. 2.After installation, open the faucet to check if it leaks. 3.Do not bend the hose with overstrain. 4.Before each usage please check if the connection between the jointer of the water inlet hose and the water faucet, and the installation of the water inlet hose are firm, so as to prevent dropping from improper installation position. Dismantle the water inlet hose 1. Close the water faucet. 2. Press the locking lever. Push down the slider. Then pull of the water inlet hose. If the machine is used frequently, the jointer of the water inlet hose can be kept on the faucet to prevent damaging the fixing screw. Locking level Slider