Haier HWM65-728A User Manual - Page 6

Installation and adjustment Please install and adjust the machine according to the requirement of the manual. It is very important to your security and correct operating the machine. Install the bottom plate After opening the package, please lean the washing machine gently down on soft items (like towel cloth,blanket, etc.). Install the bottom plate to the bottom of the machine with seven screws by a cross screwdriver, then lift the machine up gently. See to the figure: Back Bottom plate Front Screw Carpet Adjust the Installation position The washing machine away from wall should be overrun 20mm. The largest allowable slope of the shank base of the machine is 2 .The slanting or rough ground will result in unstable running or stoppage of the machine. Please adjust it with following methods: Confirm it's horizontal: Hang the lead line to check if it is horizontal. Adjust the adjustable leg: 1 .To twist the adjustable leg, please first lift up the side of the leg slightly, loosen the adjustable nut, and twist the leg. 2 . After adjustment, fasten the nut. Loosen High the adjustable nut Fasten the adjustable feet Low 4