Haier HWM88-113S User Manual - Page 11

Washing sequence Water-filling selector handle Overfilling sign Wash timer (To set to below 2 minute, first set to 5 minute then turn it back. it can increase the service life of the timer). Wash selector Water-filling entrance Buzzer (Strong current, (The buzzer will ring when standard current) the washing finishes) Spin timer (to set to below 1 minute, first set to 2 minute then turn it back. it can increase the service life of the timer). OFF 15 12 WASH TIMER 9 STRONG 3 STANDARD 6 DRAIN WASH SELECTOR OFF MAX BUZZER OFF 5 1 4 2 3 SPIN TIMER Wash 1.Water-filling selector (1) Set the water-filling selector at the "WASH" side. (Figure 1) WASH SPIN WATER INLET SELECTOR Figure 1 (2) Set the water level adjusting lever to needed line. 2. Fill the water and add the dissolved washing powder to make the water level reach the preset position. (Figure 2) Run washing program for some time to stir and dissolve the powder completely. Page 8 STRONG Figure 2 STANDARD 3.Put in the laundries. If the water quantity is insufficient, please add water. WASH SELECTOR DRAIN Figure 3 4.Select the current. Select the strength of the current according to the laundries. (Figure 3) OFF 3 5.Select the washing time Select the washing time according to the laundries. (Figure 4) 12 WASH TIMER 9 STRONG 6.After washing, the buzzer will ring. Set the "WASH STANDARD SELECTOR" at "DRAIN". (Figure 5). WASH SELECTOR 6 Figure 4 DRAIN Figure 5 9