Haier HWM88-113S User Manual - Page 15

Disposal after washing After using, please clean the lint and eyewinker of the lint filter and overflow filter in time. Otherwise it may influence your using the machine. Please first pull off the power plug from the receptacle before cleaning. Cleaning the lint filter The lint filter must be used during washing. It must be cleaned in time after each using. 1. Take off the lint filter Put hand at the indicated position. Push down to take it off. ( See Figure 1) 2. Clean the lint Put it in water and clean while it is still wet.(See Figure 2) Figure 1 3. Install the lint filter After cleaning, insert the bottom Figure 2 of the lint filter ( marked with "down side") into the overflow filter , then push the upper part of the filter in ( marked with " up side "). (See Figure 3) Figure 3 Cleaning the overflow filter Too much lint on the overflow filter will influence the normal usage of the machine. Please clean it every two months. 1、Take off the overflow filter. Elastic fixing claw As indicated in the figure, nip the elastic fixing claw and pull it to the direction of the arrow to take it off. 13