Haier JC-398G User Manual - Page 6

Setting the temperature The appliance is preset for normal operation (12°C). While you are entering the temperature by pressing the temperature buttons about 3 seconds, the set temperature will flash on the display. To reduce the temperature, press the bottom button"1" To increase the temperature, press the top button"A " You can change the setting to 10°C simply by pressing the SET UP, IMPOCR ALARM LIMP temperature adjustment buttons and the bottom button twice, and finally the SETUP bottom to confirm At the moment, the alarm will sound and temperature displayed flash. Press the button Alarm to inactivate the alarm. The temperature display will keep flashing when 10°C is reached. --- The temperature can be set at between +4°C and 18r. Low temperature compensation The refrigerator can compensate low temperature automatically. When ambient temperature is below the set point, temperature in the appliance will drop down.When inside temperature is 4°C below the set temperature, the appliance will activate the low temperature compensation system automatically.When the set temperature is reached, the low temperature compensation system will be inactivate. If Fl appears in the display, the appliance has fault. Consult your nearest customer service point, quoting the type of appliance, index and service number. Audible warning signal The audible warning signal helps to protect your winesagainst excessive temperature fluctuations. It sounds when the door has been left open for long,reducing inside temperature by 2°C. The audible warning device is switched off by pressing the alarm button. It sounds when the interior gets too warm or too cold.The temperature display will also flash. The audible warning device is switched off by pressing the Alarm button. The temperature display will continue to flash until the cause of the alarm has been rectified. Storing wine If you are storing wine for long periods of time, it should be stored at a temperature of between 10°C and 14°C. This is the temperature wine cellars are kept at, and it is just right to allow wine to mature properly. Try to store bottles of the same sort of wine nest to each other on the same shelf so as to avoid having to move others to access the bottles you want to remove, as wine should not be moved during storage if at all possible. Air exchange with activated carbon filter The way in which wines continue to mature depends on the ambient conditions. The quality of the air is therefore decisive for preserving the wine. An activated carbon filter has been fitted in the lower area of the rear wall of the appliance to ensure that the air throughput remains at an optimum quality. Caution: We recommend that you replace the filter once a year. Filters can be obtained from your dealer. Changing the filter: Take the filter by the handle. Turn it to the left and remove. Inserting the filter: Insert with the handle in a vertical position. Turn it to the right and insert. Installing the handle Remove the 2 screws from the glass door and take out the handle from inside the cabinet. Tightly fix the handle to the door with the two screws just removed. Child-proof lock The child-proof lock is designed to protect the appliance from being switched off and the temperature setting from being changed accidentally by children. Switching on the children-proof lock: hold down the"A"and "V" buttons simultaneously for about 3 seconds. A double beep confirms your entry. The LED will display temperature. Press SETUP button to confirm your latest adjustment and inactivate temperature adjusting mode. At the moment, temperature cannot be adjusted or displayed by pressing the "A" and " V"Buttons. 5 6