Haier L46A9-AK User Manual - Page 35
Continue
View all Haier L46A9-AK manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Adjust menu In VGA and DVI input mode, H-Position and V-Position can be adjusted to eliminate transverse line interference. OK Q.VIEW CH+ VOL- MENU VOL+ CH- PSM SSM NOTE As the frequency of display differ in PC device you may select the appropriate frequency to obtain desired effect. If the signal of receive is excess, the picture can be not displayed or wrong on the screen. (Continue) PC setting 1 Press CH+/- buttons to select RGB, then press VOL/+ buttons to enter the sub menu. 2 Press CH+/- buttons to select the desired item, press VOL+/- button to adjust. Display Mode Normal Adjust RGB Default Auto Sync. Color Temperature Normal Black Stretch On A B C RGB is opted for adjustment Red 0 Green 0 of the numerical value of red, Blue 0 green and blue in VGA/DVI mode. A B C Default This is opted for adjustment of parameters to delivery setup in VGA mode.(After the operation, complete will be on the right of the operation) Repeat step 1 and 2 to set the Default. Auto Sync This is opted for adjustment of picture location requency and phase parameters in VGA mode.(After the operation, complete will be on the right of the operation) In VGA , if no signal input, the Auto Sync will be no adjustable. Repeat step 1 and 2 to set the Auto Sync. Note Recommendatory frequency as follow: Sequence frequency H-frequency V-frequency KHz Hz Remark 31.5 60 DOS 37.88 60 VESA 48.36 60 VESA 33