Haier LC-138WB User Manual - Page 5

PRODUCT SAFETY PRECAUTIONS Distinguished Haier user: Thank you for using haier product. In order to read the operating instruction and use the product better, prevent personal injury and damage to goods, please read the instruction carefully and observe the content of following logo. Warning If operating mistake, may cause accidental physical harm Notice If operating mistake, may damage goods and property loss. Operating must be prohibited. Operating must be observed. About electrical Power This product uses 220-240V/50HZ alternating voltage, if large voltage fluctuation of supply power voltage (over 187-242V range), it may cause the Beverage Chiller broken or even damaged. This moment you have to add automatic voltage regulator which power is greater than one kilowatt. Earthing Prohibit dismantling the third prong of plug in any case, its acts as the ground. Power and plug 1.Do not damage the power line. Don't put the Beverage Chiller on the power line and don't step on the power line. When clean the Beverage Chiller please be careful do not roll the power line. 2.Do not brute force pulling power plug, must hold the plug and then pull the plug. 3.When the power line or plug is damaged, must disuse and change to the designated maintenance point. 1.Use three-hole socket, check the power plug and socket are fastened, or else a fire or electric shock may occur. 2.After the Beverage Chiller is installed, the plug should be put on the place that easy to touch in order to pull out the plug in time when accident occurs. 3.Before clean, maintain and replace the lighting bulb, must be power off. 4.If the power line has to be lengthened, the wire section surface must greater than 0.75m². Gas and other flammable gases leak out The gas leakage valve should be closed immediately, and open the door and windows, don't pull out Beverage Chiller plug and other household appliances. 3