Haier LC-138WB User Manual - Page 7

PREPARATION BEFORE USE 1 Remove all packaging components. Including thin lm, box cover, foam base and xed tape must be removed. 2 Check the attachments and datum. Check the contents according to the packing list. 3 Put the Beverage Chiller on the suitable position. Don't put on to cold environment.(less than 10°C) Don't put in the rain or outside the room. Don't put Beverage Chiller on the wet place or some places easy to splash, if wet use close to wipe, rust protection, in uence on insulation performance. Put Beverage Chiller keep away from the heat source, don't direct sunlight, to avoid a ecting performance. If put the Beverage Chiller on the carpet, wood oor, the heat may distain the oor, so must mat interlayer. Around the Beverage Chiller need to empty 10cm space to rejection of heat. Put Beverage Chiller on the at oor, if uneven oor Beverage Chiller running produces vibration and noise, cause failure. We can adjust the sole of the Beverage Chiller according to the oor atness, decrease the vibration and noise. Clockwise rotation to increase the Beverage Chiller height. Contrarotate to reduce the Beverage Chiller height. Above 10cm Above 10cm Attention If need to bolster, choose a stable, smooth setting block, be sure to keep in mind the foam base never use for setting block. Above 10cm Adjustable H L 4 Beverage Chiller open door size. (Unit: mm) d MODEL a b c d LC-138WB 649 1037 1015 495 Note: Product technical data reference each series of models a D W 5 Cleaning the Beverage Chiller before use. Well-placed, it's better to clean the Beverage Chiller, use soft close to wipe the wine 6 On standing After installed and cleaned, please don't power on right away, on standing at least 30 minutes, and then power on, to ensure normal operation. 5 H c b