Haier LE22T3W User Manual - Page 16

then press / to set the found to be exchanged to. menu Prog. Exchange Current Channel 10 To Channe 20 Exchange OK Sound Tuning   D After adjusting the current channel and the found to be exchanged to, press / to move the cursor to the Exchange option, and then press OK to start exchange and exchange the program on current channel to the channel you set for exchange. Watching TV Program You can watch TV program in a presetting channel. How to select the desired program A Using Program number buttons Directly enter the channel number with the numeric keypad on the remote control. If to select channel numbers of double-digital or three-figure, press continuously the numeric buttons in three second. B Using CH˜ /CH ™ buttons Press CH+ to select a channel number in number increasing direction. Press CH ™ to select a channel number in number decreasing direction. How to select the desired sound Press VOL-/+ buttons on the remote or the front of the TV set to adjust the volume level. The range is 0~100. When the volume buttons are pressed the volume level is displayed automatically on the TV screen. Mute Setting A Press MUTE button on the remote control and a icon will display on the screen. At this time, the sound of the TV set is turned off. Basic Receiving and Playing Operations B If you want to recover the sound, press MUTE button again or directly press VOL+ button. Quick program view A Suppose that you previously watched a TV program on Channel 8, but now you are watching a TV program on Channel 18 (as shown in the below figure). B If you want to return to Channel 8, just press "RECALL (Flashback)" once. C If you want to return to Channel 18 again, just press "RECALL (Flashback)" once again. Note R This function is only available in TV mode. Picture Control Functions This means the adjustment of specific contents in the picture, if already in normal condition, it is not necessary to make any adjustment. Due to different TV signal inputs, some items may need to be adjusted. The following makes a description by only taking TV signal as an example. How to select the picture mode A Press MENU to display main menu on the screen, and   then press /to select the Picture menu, afterwards press / to enter the option to be adjusted.   B Press / to move the cursor to the option to be adjusted, and then press / to select Standard/ Vivid/Soft/User. You can also press P.MODE on the remote control to TFT -LCD television Owner's Manual 16