Haier LE22T3W User Manual - Page 22

  Press / to select the Power on Volume option, and then press / to freely adjust the volume within the range of 0~100. V Unlock Setting   Press / to select the Unlock option, and then press  to clear all the lock settings, namely set all the lock setting options as OFF; the Preset Channel is set as OFF and max volume returns to 100 (except password). Streaming Media Playing System Note R The diagrams in the following section are schematic and only for your reference. Please see the actual product if necessary. A Supported file formats: q Picture: *. JPEG; q Music: *. Mp3(8-320kbps; WMA(32-192kbps); AAC(16-576kbps) q Movie: MPEG4: *. avi files in accordance with Div*4. x/5. x Protocol; MPEG2: some *. mpeg files; MPEG1: *. dat and some *. mpeg files; RealVideo q Text: *. Txt. Note R Due to the particularity of file coding, some files may be unable to be read. B Supported equipment: Support the equipment that supports Mass Storage Protocol and whose file system is FAT/NTFS/FAT16/ FAT32, such as some USB disks, mobile hard disks, card readers, MP3 players and digital cameras. If USB equipment could not be identified due to unsupported file system, please format the equipment to the above-mentioned file system; C The external card reader supports most of the digital cards in the current market; the types of digital cards that can be read are relevant to the performance of selected card reader; you may attach standard mobile hard disks (working voltage 5.0V, working current not higher than 500mA); during media playing, do not pull out storage media, otherwise it Basic Receiving and Playing Operations may cause system halt, damage the files in storage media or damage USB equipment; sometimes, the TV may halt due to overhigh information error rate, in which case you should restart the system; there are a lot of nonstandard USB mobile equipment in the market, they may not be identified when connected to the streaming media playing system; the above phenomena may also occur on computers and are not the TV's fault. D To achieve smooth playing, ensure the following: q The file code rate should be lower than 300KB/S; q Due to the limitation of USB signal transmission distance, it is recommended not to use USB patch cord, in case of using the cord, make sure that its length is not over 1m; q Use high-speed USB equipment in conformity with USB2.0 Interface Standard; if USB equipment in conformity with USB1.1 Interface Standard is used, the playing may be unsmooth. E Although many movie files are with such postfixes as avi and mpeg, actually there are several formats in the files; however, the TV can only play some files in avi and mpeg formats. Some files with the postfix "dat" are not movie files, but data files commonly used in computers, and they can not be played as movies. Start/Exit Streaming Media Playing System A Press USB on the remote control unit to select the streaming media function. B Insert USB equipment into corresponding USB interface 2s after starting the system. C After entering the system menu, press / on   the remote control unit to select the required USB equipment, and then press / on the remote control unit to select the required file. D Press OK to enter the selected file. E To exit the streaming media playing system and watch a TV program, you must return to the streaming media main menu at first (to protect equipment), and then press SOURCE to select TV or directly press USB to return to the TV mode. TFT -LCD television Owner's Manual 22