Haier QDP555SBNTS Use and Care Manual - Page 19

Filter Assembly, Ultra-fine Filter Assembly, Protect Against Freezing, Fine Filter

Page 19 highlights

ENGLISH CARE AND CLEANING FILTER ASSEMBLY Inspect and clean the filters periodically. This should be done every month or more depending on usage. If there is a decrease in wash performance or dishes feel gritty, this is also an indication the filters need to be cleaned. ULTRA-FINE FILTER ASSEMBLY To clean the Ultra-Fine Filter assembly, remove the bottom rack. Twist the Ultra-Fine Filter assembly counterclockwise water and use a sponge to carefully remove any stubborn particles. For models with a 2-piece Ultra-Fine Filter assembly with an additional Filter Basket for food particles, twist the Filter Basket in the counterclockwise direction to unlock it from the Ultra-Fine Filter assembly. See directional arrows on the bottom of the Filter Basket. Pull the Filter Basket to remove from the assembly, throw away any food particles, rinse with warm soapy water, and use a sponge to remove any stubborn particles. 2-piece - Ultra-fine Filter assembly with additional Filter Basket (on some models) FINE FILTER To clean the Fine Filter (mesh plate), remove the bottom rack. Remove the Ultra-Fine Filter. Lift the Fine Filter up and out from under the two rear retaining tabs. Rinse filter with warm soapy water. Scouring pads or brushes can scratch the filter surface but a soft brush or sponge may be needed to remove stubborn soils or calcium deposits caused by hard water. Once cleaned, replace the Fine Filter making sure it goes under the two rear retaining tabs. Replace the Ultra-Fine Filter. Spray Arm Fine Ultra-Fine Filter Filter Once cleaned, replace Filter Basket back into the Ultra-Fine Filter assembly and twist it clockwise to lock into place. PROTECT AGAINST FREEZING If your dishwasher is left in an unheated place during the winter, ask a service technician to: 1 Turn off electrical power to the dishwasher. Remove fuses or trip circuit breaker. 2 Turn off the water supply and disconnect the water inlet line from the water valve. 3 Drain water from the water inlet line and water valve. (Use a pan to catch the water.) 4 Reconnect the water inlet line to the water valve. 49-4000207 Rev 1 19

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72

49-4000207 Rev 1
19
ENGLISH
CARE AND CLEANING
FILTER ASSEMBLY
Inspect and clean the filters periodically. This should be
done every month or more depending on usage. If there is
a decrease in wash performance or dishes feel gritty, this is
also an indication the filters need to be cleaned.
ULTRA-FINE FILTER ASSEMBLY
To clean the Ultra-Fine Filter assembly, remove the bottom
rack. Twist the Ultra-Fine Filter assembly counterclockwise
water and use a sponge to carefully remove any stubborn
particles.
For models with a 2-piece Ultra-Fine Filter assembly with
an additional Filter Basket for food particles, twist the Filter
Basket in the counterclockwise direction to unlock it from
the Ultra-Fine Filter assembly. See directional arrows on the
bottom of the Filter Basket. Pull the Filter Basket to remove
from the assembly, throw away any food particles, rinse with
warm soapy water, and use a sponge to remove any stubborn
particles.
Once cleaned, replace Filter Basket back into the Ultra-Fine
Filter assembly and twist it clockwise to lock into place.
PROTECT AGAINST FREEZING
If your dishwasher is left in an unheated place during the winter,
ask a service technician to:
1
Turn off electrical power to the dishwasher. Remove fuses or
trip circuit breaker.
2
Turn off the water supply and disconnect the water inlet line
from the water valve.
3
Drain water from the water inlet line and water valve. (Use a
pan to catch the water.)
4
Reconnect the water inlet line to the water valve.
Fine
Filter
Spray
Arm
Ultra-Fine
Filter
FINE FILTER
To clean the Fine Filter (mesh plate), remove the bottom
rack. Remove the Ultra-Fine Filter.
Lift the Fine Filter up and out from under the two rear
retaining tabs. Rinse filter with warm soapy water. Scouring
pads or brushes can scratch the filter surface but a soft
brush or sponge may be needed to remove stubborn soils
or calcium deposits caused by hard water. Once cleaned,
replace the Fine Filter making sure it goes under the two rear
retaining tabs. Replace the Ultra-Fine Filter.
2-piece - Ultra-fine Filter assembly with additional Filter Basket
(on some models)