Haier QSS740RNSS Use and Care Manual - Page 18
Glass Cooktop
View all Haier QSS740RNSS manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
ENGLISH CARE AND CLEANING GLASS COOKTOP Normal Daily Use Cleaning ONLY use ceramic cooktop cleaner on the glass cooktop. Other creams may not be as effective. To maintain and protect the surface of your glass cooktop, follow these steps: 1. Before using the cooktop for the first time, clean it with ceramic cooktop cleaner. This helps protect the top and makes cleanup easier. 2. Before using the cooktop for the first time, clean it with ceramic cooktop cleaner. This helps protect the top and makes cleanup easier. 3. Shake the cleaning cream well. Apply a few drops of ceramic cooktop cleaner directly to the cooktop. 4. Use a paper towel or nonscratch cleaning pad for ceramic cooktops to clean the entire cooktop surface. 5. Use a dry cloth or paper towel to remove all cleaning residue. No need to rinse. Ceramic Cooktop Cleaner Clean your cooktop after each spill. Use ceramic cooktop cleaner. NOTE: It is very important that you DO NOT heat the cooktop until it has been cleaned thoroughly. Burned-On Residue NOTE: DAMAGE to your glass surface may occur if you use scrub pads other than those recommended. 1. Allow the cooktop to cool. 2. Spread a few drops of ceramic cooktop cleaner on the entire burned residue area. 3. Using a cleaning pad for ceramic cooktops, rub the residue area, applying pressure as needed. 4. If any residue remains, repeat the steps listed above as needed. 5. For additional protection, after all residue has been removed, polish the entire surface with ceramic cooktop cleaner and a paper towel. Heavy, Burned-On Residue 1. Allow the cooktop to cool. 2. Use a single-edge razor blade scraper at approximately a 45° angle against the glass surface and scrape the soil. It will be necessary to apply pressure to the razor scraper in order to remove the residue. 3. After scraping with the razor scraper, spread a few drops of ceramic cooktop cleaner on the entire burned residue area. Use a non-scratch cleaning pad to remove any remaining residue. 4. For additional protection, after all residue has been removed, polish the entire surface with ceramic cooktop cleaner and a paper towel. The ceramic cooktop scraper and all recommended supplies are available through our Parts Center. See the Accessories and Consumer Support sections at the end of this manual. NOTE: Do not use a dull or nicked blade. Metal Marks and Scratches 1. Be careful not to slide pots and pans across your cooktop. It will leave metal markings on the cooktop surface. These marks are removable using the ceramic cooktop cleaner with a non-scratch cleaning pad for ceramic cooktops. 2. If pots with a thin overlay of aluminum or copper are allowed to boil dry, the overlay may leave black discoloration on the cooktop. This should be removed immediately before heating again or the discoloration may be permanent. NOTE: Carefully check the bottom of pans for roughness that would scratch the cooktop. Use a non-scratch cleaning pad for ceramic cooktops. 18 49-2000682 Rev. 0