Haier RWT300AW User Manual - Page 14

English Lint Filter The lint filter must be used during washing. It must be cleaned in time after each using. 1. Take off the lint filter. Pull up the lint filter from the agitato.r 2. Remove lint Press the lint screen clip with your thumb and index finger, and get the screen downward as shown in figure below. While wet, remove the lint from the screen. 3. Install the lint filter After cleaning, install the screen back onto the lint filter. Then put the lint filter back in the agitator barrel. Safety Lid Switch If for any reason you open the lid in the middle of the wash cycle, the washer will not spin and will shut off automatically. Once the lid is closed, the washer will start back on. 13