Haier SIG100-97 User Manual - Page 18

Trouble shooting answer to question (If there's breakdown, please pull off the power plug before checking) The following phenomena are not breakdowns sometimes. Please confirm again before sending it to repair. If there are real breakdowns, please come to the special maintenance department or after-sale service department of our company. Do not repair it by yourself. Phenomena The reason How to settle After the "reserve" is started, it rings and the digital tube The top lid is not closed displays "E0" Close the top lid The draining does not work, or the speed of draining is too slow. The digital tube displays "E1" and it rings. It stops running during wash, rinse or spin. The digital tube displays "E2" and it rings. It does not do water inlet or the speed is slow (the water level is not reached after 15 minutes). The digital tube displays "E4" and it rings. The machine does not act. (the indicators are off.) Is the drain hose blocked by foreign material? The top lid is not closed Is the water faucet open or is there water supply failure? Is the water inlet valve is blocked Is there power failure? Is the power plug loose? Clean the foreign material. Open and close the top lid once. Close the top lid Open the water faucet. Open and close the top lid once. Clean the water inlet valve.Open and close the top lid once. Use it when the power is on. Insert the power plug tightly. There's abnormal sound inside the machine. The water faucet leaks. Is the machine slanting? Is there metal material inside the washing machine? Are the laundries slanting in spinning? Is the jointer of the water inlet hose is loose or twisted awry? Level the machine properly. Fasten the buttons and zipper Re-order the laundries. Close the top lid. Fasten the jointer properly. No water filling If plug is inserted firmly? If tap is turned on? If Power On/Off and Start/Pause is pressed? Insert the plug firmly Turn on the tap Press Power On/Off and Start/Pause The numeral tube shows F2 Overflow alarm Please contact the after-sales service department. Normal phenomena Phenomena Intermittent spin after spin starts Spin is selected, yet the machine doesn't spin While water filling in wash and rinse, the pulsator pauses rotation Causes (explanations) Adjust balance to avoid clothes offset The program sets a drain time, spin starts after a time. To prevent splash during water filling. Small amount of water flows out upon the washing machine is initially used This is residual water during factory perfor mance test. The machine stops when top cover is opened This is a normal fact. Due to the drum rotation, during running. an open cover alarm function is provided for safety. 16