Haier SIG100-97 User Manual - Page 4

Safety precautions

Page 4 highlights

Safety precautions Please insert the power cord into special three The power cord plug should be convenient -phase receptacle.The earthing terminal of the to be pluged in or pluged out with hand receptacle must be earthed reliably.If possible ,while the washing machine runs normally. please adopt electric leakage protector. Be sure to pull the plug out and close the water tap when the machine is idle,when moving the machine,or when cleaning the machine.Do not use wet hand to ins- ert or pull out the power plug. Earth Do not bend ,extend,twist,bind by force.Do not press or nip it with weight. Keep the pin of the power plug clean,if the power plug is polluted with dust,please wipe with dry cloth carefully. If the power cord or the power plug is bad, to avoid risk it is required to have it replaced by the technicians of our special shop or the after-sale service department. Do not put the machine at damp place like the bath room. Never wash it with water.Not put wet laundries on the control panel. In case the washing machine is installed on ground with carpet, be careful not to block the ventilation hole with carpet. Do not use water hotter than 60 Do not let the machine share one receptacle with other electric appliances. If the power plug is damaged, or the plugging into the receptacle is loose, do not use the plug any more. Do not wash water-proof laundries like the raincoat, bike covers etc. to avoid abnormal vibrations in spinning. 2

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20

Safety precautions
2
Do not put the machine at damp place like the bath
room. Never wash it with water.Not put wet laundries
on the control panel.
Do not let the machine share one receptacle
with
other electric
appliances. If
the
power
plug
is
damaged,
or
the
plugging
into the
receptacle
is loose, do not use the plug any
more.
Do not wash water-proof laundries like
the raincoat,
bike
covers etc. to avoid
abnormal vibrations
in spinning.
Please insert the power cord into special three
-phase receptacle.The earthing terminal of the
receptacle must be earthed reliably.If possible ,
please adopt electric leakage protector.
Do not bend ,extend,twist,bind by force.Do not press or nip it with weight.
Keep the pin of the power plug clean,if the power plug is polluted with dust,please wipe
with dry cloth carefully.
If
the power cord or the power plug is bad, to avoid risk it is required to have it replaced
by
the technicians of
our
special shop or
the
after-sale service department.
The power cord plug should be convenient
to be pluged in or pluged out with hand
while the washing machine runs normally.
Be sure to pull the plug out and close the
water tap when the machine is idle,when
moving
the machine,or when cleaning
the machine.Do not use wet hand to ins-
ert or pull out the power plug.
Do not use water hotter than 60
In case
the washing
machine
is
installed on ground
with carpet, be careful not to block the ventilation hole
with carpet.
Earth