Haier TTL-700 User Manual - Page 14

Using process POWER ON/OFF button Press POWER ON/OFF button to connect power supply. After power is connected, pressing this button will cut off the supply. Numeral tube To indicate -- during sensing. To indicate remaining min. During program running. To indicate remaining reserved time (hrs) during reservation period. To indicate fault symbols for abnormal conditions (see page 17) Page 17 START/PAUSE button After the power is switched on, press it to start the machine During working, push it to pause. During pause, push this button to restart and go on working. RESERVE (HOURS LATER) SURPLUS(MIN) TTL-700 L+ock RESERVATION START PAUSE POWER ON / OFF Child safety lock program Start up: The program is optional anytime after the machine hasbeen started. Push and hold PROCEDURE SELECTION and RESERVATION buttons for more than 2 seconds at the same time. After 2 beep sounds, the child safety lock program works; all buttons are locked and cannot be selected. Release: push and hold PROCEDURE SELECTION and RESERVATION buttons for more than 2 seconds at the same time. After a beep sound, the child safety lock program is released; all buttons are unlocked. RESERVATION button Push the button to select the reserve washing time from 2 to 24 hours. Pressing the button, the numeral tube displays the reserved hours to the wash cycle end. The point light flashes to indicate in-reservation. Remarks: After pressing POWER ON/OFF to connect power supply, if the washing machine lasts idle more than 10 min, it would automatically shut off the supply. 112